Conventional Radiography

In this technique we use the classic system of a film, supported by the automatic processing by ecological revealing and a professional scanning system of X-ray films.This way it is possible for the client to access a pratical analyzing radiographic picture system and have a secure picture archive – with informatics support. We have available, classical RX sources (220KV) and a pulse emission system, both portable.

Examples services provided with Conventional Film Radiography:

•Aplication of the plans contemplated on the construction norms EN 13445 , PD 5500 ; Codap 2005 ; AD, ASME , among others.

Digital Radiography

Analysis and measurement of intern and extern corrusion (with or without removal of coatings).

Analysis of deposited calcareous, silica and others sediments in tubages.

Analysis of particles within fluids.

Analysis of welds ,cast , forged and other metallic materials.

Analysis of discontinuities on non metallic materials.

Aeronautics aplication– maintenance control – light alloys and honeycomb strutures.

Verification of eletronic circuits.

Verification of leak point in piping and reservoirs.

Veterinary application.

Verification of bus’s body structural Integrity.

Verification of suspicious packed contents.

Example Report

 

Some examples of technical inspections that A. Jorge Lima LDA has available:

Equipments and installations.

Safety Inspection to work equipment (Based on Portuguese law 50/2005 and applicable standards)

Currently, Ajorge Lima Lda is the exclusive representative in Portugal of the reputed brand Karl Deustch for products and equipment (non-destrutive testing)

For more information, please visit the Karl Deutsch website.

A A. Jorge Lima, Lda tem já disponivel o seu Plano de Formação completo, para o ano de 2010, para Ensaios Não-Destrutivos.

Todos os cursos são  reconhecidos pela Relacre através da validação por Nível 3 EN 473 / ISO 9712 e garantem uma excelente preparação para exames de  Nível 1 e 2 conforme nível de formação bem como parte de Tecnologias e materiais para candidatura a qualquer Técnica como nível 3 (Acção TCM N3)

Reúnem,  na íntegra, as exigências de horas de formação, conforme especificado pela Relacre e normas de refª .  bem como  ISO /TR 25107 : 2006 e ASME / SNT TC 1 A.

As Acções de Formação a levar a cabo são:

• PT – Liquídos Penetrantes (Nível 1 e 2)
• MP - Partículas  Magnéticas (Nível 1 e 2)
• UT1 - Ultra Sons (Nível 1)
• RT1 - Radiografia Industrial (Nível 1)
• UT2 - Ultra Sons (Nível 2)
• RT2 - Radiografia (Nível 2), Interpretação Radiográfica
• VT  - Ensaio Visual de Soldaduras
• TCM N3 - Ciência e Tecnologia dos Materiais

Para mais informações (conteúdos, datas, preços e Ficha de Inscrição) consulte os ficheiros seguintes, anexos a esta página.

Attachments:

Plano de Formação - NDT, 2010

Ficha de Inscrição, Acção de Formação

Evaluation procedures - Risk analysis.

Programs for management of quality.

Creation of welding specifications.

Control and Test plan..

Mechanical Calculation according EN / ASME.

Project and manufacturing documentation.

Dry and wet Particles, visible or fluorescents.

Permanent , yoke or indirect magnetization.

Field and in house services.

Examples

Indication of cracks , by means of fluorescent particles.

Indication of a lack of fusion on the weld in one of the bridge’s components, by means of visible wet particles.

Example Report

Diagnosis of the training needs.
Project adapted to the company needs.
Assistance to training support
Planning and Action support
Monitory and Evaluation
Study of each action’s efficiency.
Mediation with the competent entity.

Examples of developed actions:
Non-destructive tests with the following techniques:
Radiography, Ultra Sounds, Penetrating, Magnetic Particles.
Welding Procedures–Theoricaland Practical for welders and staff.
Welding standards and its correct use.
Materials and its applications.

Methodology for pressure equipment ( CE Marking).
Welding Quality Planning.
Discontinuities e defects on Constructions
Control of the nodularityin cast iron.
Application of the legislation of the transportation of dangerous goods.
Non Destructive Control in spot welding
( Automobile Industry)

Technical Design.
Technical English, French and Spannish
Quality Consulting.
Techniques and Tools of Quality.
Industrial safety and risks.
Environmental Requirements
Safety instructions and manuals.
Application of the Machinery and equipment under pressure Directives.

Auditorship for NDT needs.

Support for internal certification / qualification of operators level 1 and Level 2.

Special Aplication studies.

Visible or fluorescent system, removable by water or solvent , by means of manual application, spray or brush

Applications spray for small sized parts .

Applications on welds , foundry parts , cast and plates.

Examples

Foundry parts.

Indications (pores) using visible visible penetrants.

Indication (crack) on a disk saw using fluorescents liquids.

Example Report

Evaluation of safety conditions according to nacional rules. (Portuguese Law 97/2000)

Support for Licencing of pressure vessels.

Measurement of thicknesses on metallic materials or non metallic. Evaluation of sound propagation speed .
Detection of discontinuities on butt and fillet welds.
Evaluation of resistance spot welds. Reliability studies on the determination of flaws on foundry pieces – mass production.
We have at our disposal Digital equipment, with picture acquisition and software from KK - USLT2000, ULTRA LOG and Data Manager and also Karl Deutsch digital UT flaw detector ECOGRAPH 1090 DAC/DGS with data manager supporting software, for several inspection aplications, namely automobile industry.

Used Systems

System USLT2000

Ready for:
• DGS/DAC Evaluation.
• Data-Base Management.
• Preparation of Inspection Plans using points.
• Thickness Measurement with maximum resolution ±0,01mm.

System ECOGRAPH 1090 DAC/DGS

Ready for:
• DGS/DAC Evaluation.
• Data-Base Creation and supporting software.

Example Report